Lawn edging is one of the important aspects that you need to consider when you are setting up a lawn so that the entire surface looks even, primed properly, and can be paved easily to fit your needs from time to time. If you are looking for some of the best ideas to edge your lawn, then here is what you should read:
Landscape borders that are 4 inches deep with strips made of plastic, steel or aluminum are the most simple and subtle and can effectively help in separating your lawn from a garden. Metal edgings bends can be bent into smooth and graceful curves that can stop in spreading the grassroots. Also, by painting steel and aluminum you get the sleekest and refined garden edges as they can disappear in the garden bed and grass.
When it comes to the plastic edges, they have a black bulge which is quite prominent on the top edge. All of these types of metal edgings work best on even terrain and in case you have a lot of rises and dips, you can easily install the paver border.
Another thing that you can do is to use fencing around the flower bed in case you have issues with the pests.
Steel and aluminum landscape edging is similar in terms of pricing but the latter one is much lighter and weighs around 41 lbs. per 100 ft. In addition, it also gives a professional look and you are not required to do the heavy lifting. The steel, on the other hand, weighs about 225.
You can start by setting the border of your garden with a top edge that is approximately ½ inches above the soil level. This would help in maintaining separation and also ensure that the roots do not cross over the top. This would eventually make the garden border invisible and help you in mowing right over the top. However, you need to ensure that the top portion of the thin lawn might hurt if you move on its bare feet. Once you are done with cutting, it is important to make sure that the sharp edges are rounded off with the help of a file.
The main key behind the garden edging installation technique is to set the garden border and cut a clean vertical edge using a square spade. You can then lay the border of the garden tightly when you backfill it. There is no specific rule when it comes to shaping the edge of the garden. You can just move along the edges of your garden, and make smooth and gradual curves which can be done by bending the metal law that is edging around the circular form.
If the edges are thicker, they would be able to withstand the bumps and knocks that might appear in lawn mowing.
In case you have trouble deciding different types of lawn edging ideas, you can make use of brick pavers and concrete. This would help in making a smart border and would probably work well as a lawn edging material as well. This particular technique is suitable when you are looking for a wide border that would keep out the grass and at the same time allow the flowers and plants to spill easily while affecting the grass. With this, you can less likely to top cut them off while using the lawnmower.
You can use a paver design that has a flat surface and would allow the lawn mower wheel to easily roll on the grass and also make a clean cut. Once this is done, you would not have to trim the edges when you are done mowing. Concrete pavers are preferably used in rugged outdoor areas. Brick pavers are soft and they break down easily. You can set the pavers that you want to install in a bed of sand as that would help in leveling and positioning.
Lay the sand bed on the landscape fabric to keep the roots of the plants from edging and spreading into your garden. Moreover, the borders that are used for the paver are perfect for formal and straight gardens and can also be used for informal yards which have gradual curves and have different types of slopes. These are also adjustable and as you can easily follow the curves and bents of an uneven yard. But these do not work well when it comes to tighter curves until you shape and cut them to fit properly using a diamond blade saw.
Some tricks and tips you can apply when it comes to law edging are as follows:
● Make use of a garden hose to mark the curves and shape of the lawn edging
● If you are not satisfied with the trimming, you can always trim out the trench as you cut out the edge to smoothen the curves. You can even alter the shape of the garden bed.
● For straight borders, you can make use of a tightly stretched string line.
● Make sure that you set the front edge of the paver to be ½ inches above the soil in the lawn so that it is easy to cut the grass more cleanly.
● You can also level the paver from both sides i.e., front and back to keep the row from rising and dipping. However, it is entirely up to you but it would eventually look good on the slope if you set it on an angle.
● The top of every paver should blend well with the adjacent one and the front edges have a smooth line. You can do this with the help of a wooden block, a rubber mallet, and a hammer.
● The pavers that you might be setting are decorative and can also help in raising the garden bed slightly and help in retaining the mulch. You can easily use them to fit either lower or higher depending on the requirements and needs of your garden.